ZERO Rear Suspension Arm α WS (W Sleeve) 42mm 44mm 46mm - RDX RD SD [TOPLINE] TP-740 TP-741 TP-742

ZERO Rear Suspension Arm α WS (W Sleeve) 42mm 44mm 46mm  [TOPLINE] TP-740 TP-741 TP-742

Available in 3 lengths. Each set of arms sold seperately.
・TP-740 - 42mm
・TP-741 - 44mm
・TP-742 - 46mm

The ZERO series rear suspension arms, made from ultra-hard Delrin material, are now available in white. By press-fitting metal sleeves into both sides and creating a hybrid structure, we have pursued a sharp kicking feel and improved responsiveness.
Compatible with vehicles with inner suspension pins Φ3mm/outer suspension pins Φ2mm (RD/SD series, RDX, etc.)
The left and right sides are the same shape, so they can be used reversibly
The clearance of the suspension pin holes has been suppressed to the extreme
The ball end mounting holes are offset by half a hole on the front and back
<<Size and Weight>>
42mm: Weight approx. 8.7g
44mm: Weight approx. 9.1g
46mm: Weight approx. 9.6g

<<Accessories>>
ZERO Rear Suspension Arm WS ×2
Brass Sleeve ×4
M3 (inner diameter 3mm) × thickness 2.5mm Collar ×4
Thin Head Screw ×4 (for fixing outer suspension pin)
*Shipped with brass sleeves and spacers already installed.

*Depending on the vehicle model, a gap may occur between the suspension mount and the suspension arm. In that case, please adjust it with a commercially available M3 spacer as needed.

*Also, if the tip of the suspension arm interferes with the wheel, please make adjustments as needed, such as thinning the interfering part with a cutter or similar tool.