PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L
-12%
Reve D

PREORDER: Aluminum Front Lower Arm Set for RDX / MC-III [Reve D] D1-03-08L

$84.99
$74.99 In Stock Pre-Order Sold out
SKU: PREORDER: D1-03-08L
Notify when available

1-4 DAYS DELIVERY

100% ORIGINAL AND QUALITY

24 MONTHS GUARANTEE

  • Description
  • Reviews

*This is a preorder, they will arrive in DECEMBER 2026.

This is an aluminum front lower arm set for the MC-III!
The lightweight, high-rigidity aluminum front lower arms, when installed on the MC-III, increase suspension rigidity, making quick steering inputs and angle maintenance easier to control. The
rearward-angled titanium arm rods increase clearance between the tire and lower arm, achieving a greater steering angle than ever before.
The shock absorber mounting position is sideways, allowing for more precise lever ratio adjustments, enabling instant tuning to suit different road surfaces.
Furthermore, the rearward-mounted shock absorber position reduces overhang weight, dramatically improving front-end response!
While it will perform best when combined with the Rêve D aluminum front short shock absorbers (to be released later), it can also be installed and used on the MC-III by using longer shock ends with short shock absorbers from other manufacturers.
Take this opportunity to try the aluminum front lower arm set and make your MC-III's performance even more competitive!
Click here for instructions!

 

On the new arm, the damper mounting position is located further rearward compared to the standard arm.

As a result, depending on the Ackerman setting and steering angle, the tie rod may interfere with the damper.

To avoid this interference, we recommend using the currently popular combination among Reve D users: short dampers and L-size rod ends. This setup positions the damper higher, helping prevent contact with the tie rod.

Once our aluminum dampers, which are currently under development, become available, everyone will be able to take full advantage of the maximum steering angle without this concern.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Recently Viewed