VIA Knuckle IA±3° Trail 0,±3mm -RWD Knuckles for 1-10 Drift [Hikotech] HK2064B

[Major features]
- Separate structure for hub housing and main unit
- Industry first design based on negative included angle
- Can be used with standard knuckle characteristics by assembling with positive included angle
- Trail is 0mm/+3mm/-3mm
- Included angle is +3°/-3°
- Achieves a cutting angle of a different dimension by avoiding tie rods
- Can be changed to a variety of settings by expanding optional hub housing

[Split structure]
The split structure of the hub housing and main unit allows you to change the included angle, trail, and camber without changing the Ackerman.
More detailed changes will be possible with the hub housing that will be released in the future.
*Please prepare four 850 bearings separately.
*Axles of Φ5 can be used, but please use our three-point front axle.

[Included angle]
Negative included angle / Plus included angle
You can use different characteristics.
・Negative included angle (recommended)
Caster near 0°, plus (positive) trail combined to achieve a high trace feeling that does not break down at any angle from shallow to deep angles.
・Plus included angle It
is close to the characteristics of a general knuckle and is compatible with conventional settings.

About Included Angle
https://ameblo.jp/hikotetsu/entry-12860892159.html

About the trail
: https://ameblo.jp/hikotetsu/entry-12860898296.html

About the cutting angle
https://ameblo.jp/hikotetsu/entry-12860996963.html

About bearings and axles
https://ameblo.jp/hikotetsu/entry-12861352780.html