PC Rear Spring Medium Hard for RWD Drift - YELLOW - 32mm 10T [Reve D] RD-010RMH

REVE D PC Rear Spring Medium Hard for RWD Drift (RD-010RMH)

A multi-winding type PC (Plastic tile, Concrete) rear spring specialized for road surfaces with relatively low grip such as P tiles and colored concrete.

Thorough attention is paid to the material, quenching temperature, and quenching time, and we have a lineup of three types (medium, medium hard, and hard) of multiple winding type so that you can select according to various vehicle weights and road grips.
By adopting the first line contact structure for the rear spring, we have achieved overwhelming traction performance and improved response even on low grip road surfaces.
With the 2-way structure, you can instantly adjust to the course by swapping the top and bottom of the spring (see the explanation below for details).

<Main specifications of medium hard spring>
■Length (natural length): 32mm
■Number of windings: 10.0 windings
■Heat-shrinkable tube for identification Color: Yellow

RD-010RMH [PC Rear Spring (Progression type, Medium Hard, 2 pieces)] 780 JPY (without Tax)

This is a dual progression rear spring, specialized for road surfaces with comparatively low grip such as P tiles and painted concrete!

We did a lot of research selecting the material, steel quenching temperature and quenching time with many results to compare.Giving us a lineup of three types of rear spring (Medium, Medium Hard, Hard) that can be selected according to the vehicle weight and road surface
grip.With the 2-way structure, the springs can be flipped up and down to instantly adjust to the circuit track conditions.(Please refer the following explanation for details)

<Main specifications of Medium Hard spring>
■ Length (natural length): 32mm
■ Number of turns: 10.0
■ Shrink tube color ID: Yellow

◆PC Rear spring matching table

<Introduction of 2WAY structure>
◆When using the
contact area between the lines on the upper side / Contact lines UP When using the contact area between the lines on the upper side, the center of gravity of the spring increases and the sinking of the suspension occurs. Induce Enhances traction and strengthens kick-out when the throttle is on.
By raising the center of gravity of the spring, the droop of the suspension is induced and the kicking out feeling is stronger.

◆ When used with the
line-to-line contact part on the lower side / Contact lines Down When using the line-to-line contact part on the lower side, the center of gravity of the spring is lowered and excessive suspension movement is suppressed. Recommended when you want to improve stability.
By lowering the center of gravity of the spring, excessive suspension movement is suppressed and stability is increased on low grip surfaces.

◆ Heat shrink tube for identification

A heat-shrinkable tube is included to help identify the spring.
(* Medium: Black, Medium Hard: Yellow, Hard: Red)
Cut it to the desired length, attach it to the spring referring to the image, warm it with a dryer etc. and fix it (* When using a dryer, burn enough Please note) to etc.
A Heat-Shrinkable Tube Is Bundled For Easy Identification Of Springs.
(* Medium: Black, Medium Hard: Yellow, Hard: Red)
Cut It to your Desired Length, Attach It to the Spring With Reference to the image, warm it with a drier in order to fix it (* Please be careful of burns when using a drier on high heat)

◆Aluminum spring retainer 0mm is recommended! / Aluminum Spring Retainer 0mm is the superset

For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ￥980) with a mounting height of 0 mm .
It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.
For PC rear springs with a spring length of 32 mm, we recommend the aluminum spring retainer (RD-007-0 ¥980) with a mounting height of 0 mm.It is possible to suppress the mounting play with the outer guide part and maximize the original performance of the spring.

WE ARE A REVE-D DEALER! MORE REVE D PRODUCTS CAN BE SEEN BY CLICKING BELOW