Don’t forget your battery!
Or a 2400mah REEDY (BEST VALUE) Rechareable LIPO Battery
Futaba’s high-end car radio system – the 7PX – has been the favourite of many of the world’s top drivers. Taking over from the 7PX’s DNA, the all new T10PX was born.
With the new F-4G fast response communication system, the incredible response feeling recognized by the world champion has improved!
In addition, telemetry communication – which was not possible with T-FHSS SR protocol, can now be used.
With the new “Feeling” function, the radio can be made to feel like it is custom made to suit each driver.
With support for a full 10 channels, this competition radio is also designed to appear to the scale enthusiast too. The 10PX is Futaba’s highest grade on the circuit.
• Lightest in its class & highly balance design
• New high-speed F-4G response system installed
• New response “Feeling” function
• Supports up to 10 channels
• Wide viewing angle full-colour LCD adopted
• New icon menu used
• Can be used as a game controller by using the USB external output terminal
• New wheel unit/APA/APA angle/trigger used
• Throttle and steering spring replacement mechanism
• New shape multi-position rubber grip
• Paddle shift lever switch + bottom switch + 3 position switch incorporated
• Supports left and right-handed specifications
• Large capacity LiFe battery FT2F1100B included
• Optional LiPo battery LT2F2000B can be used
Supplied complete with Futaba R404SBS-E receiver (for use with EP only – not to be used with gas powered models).
Functions / specifications
Date and time
Model deletion (in SD card)
Model type * New function
Trim / dial settings
Curve (EXP) 111
Feeling * New functionMixing menu
CPS mixing (1.2.3)
Program mixing (126.96.36.199.5)
MC (ESC) link
Gear ratio table
Home/ES1/ES2/ES3 button settings
Home screen display settings
|Interface||Colour TFT Touch Screen and Edit Buttons|
|Mixes||5 Program Mixes|
|Model Memory||40 (+ SD Card)|
|ModelName||Up to 15 Characters|
|Modulation||Futaba F-4G, T-FHSS SR, T-FHSS, S-FHSS, Mini-Z|
|Receiver||Futaba R404SBS-E Included|
-Full color touch screen LCD
T10PX has an HVGA 4.3 inch, full-color, backlit LCD touch screen. The screen is transﬂective which enables both indoor and outdoor visibility.
Equipped with an F-4G system that enables telemetry with faster response than the T-FHSS SR system.
Up to 10 channels can be operated by using the S.BUS2 system together.
By setting to the MINIZ system in the receiver setting menu, you can use Kyosho Mini – Z Evo dedicated receiver RA-42. Dedicated receiver RA-42 requires purchase separately.
Software can be updated by microSD card. Model data can also be saved in a microSD card. In addition, telemetry log data can be saved.
Model names can use up to 15 letters, numbers, and symbols, so that logical names may be used. A model memory with different setups can be created by using the model copy function.
A paddle switch near the wheel, a 3-position switch on the grip, and a bottom switch on the bottom are equipped to support multiple channels and functions.
The optional LT2F2000B Lipo battery can be used as the transmitter power supply. The running time is extended.
Brake mixing of the front and rear wheels of 1/5GP and other large cars can be adjusted independently.
Smooth cornering is possible by the independent left and right steering servo setting.
This function can be used with crawlers and other 4-wheel steering type vehicles.
ESC at the front and rear are controlled independently.
The sensitivity of Futaba car rate gyros can be adjusted from the T10PX.
This function is intended for vehicles such as tanks.
LED lighting and ﬂashing control using our CPS-1 channel power switch can be matched to steering and throttle operation by switch only.
This is a special function that allows setting of the parameters of our S.BUS servo whose settings are changed by using PC Link software.
This is a dedicated function which allows setting of the contents of the Link software which makes possible Futaba speed controller (ESC), MC960CR, MC950CR,MC850C, MC851C, MC602C, MC402CR, etc. variable frequency and other data changes by PC at the T10PX.
Sudden trigger operation on a slippery road surface will only cause the tires to spin and the model to not accelerate smoothly. By setting the throttle speed function, operation can be performed smoothly and easily.It also suppresses battery consumption.
When you sense that the steering servo is too fast, etc.,the servo operating speed (direction that suppresses the maximum speed) can be adjusted.
When the telemetry function is OFF to conﬁrm that the telemetry function is not operating.
This function assigns functions to dials (digital trim,grip dial, knob). The step amount and operating direction can also be adjusted. Trim positioning at each model call is unnecessary because all the dials are digital.
This function assigns functions to 10 switches. The operating direction can also be set.
The wheel position can be oﬀset by using an accessory APA wheel position oﬀset adapter.
The wheel angle can also be adjusted.The position of the throttle trigger can be moved for-
ward and backward.
It is possible to convert to a narrow grip type by ex-changing the rubber grip.
Lock functions which prohibit setting and operation by transmitter trim, and dials are provided.
The left and right installation direction of the wheel section can be reversed.
The vibrator can be operated at racing timer lap navigation, time-up, and low battery, telemetry alarm.
The transmitter can be used as a game controller by connecting it to a computer with a USB cable. (Some games cannot be used.)
YOUR T10PX INCLUDES THE FOLLOWING COMPONENTS:
- T10PX Transmitter
- R404SBS OR R404SBS-E Receiver
- Dry Battery Holder
- Wheel offset adapter two size (APA)APA Mounting screws *Spare screws are also included
- Wheel adapter 32 deg
- Wheel Angle spacer 5 deg
- Large diameter steering wheel
- Trigger guard (Lx1/Rx1)
- Grip rubber x1
- Blind paddle x2
- Hex wrench
- Short manual
WHEEL SYSTEM, 10 CHANNELS (F-4G SYSTEM), 4 CHANNELS WITH TFHSS-SR, T-FHSS SYSTEM
2.4 GHz band/ -Transmitting RF power output: 100 mW EIRP
LiPo – NLF2F2000B (7.4 V)
LiFe – FT2F1700BV2 (6.6 V)
350 mA or less (When the T-FHSS, Vibration off, back lighting on)
4.3 INCH BACKLIT COLOR TFT LIQUID CRYSTAL TOUCH PANEL*
*When you turn on your 10PX, bright dots may appear on your screen display. Your display contains an extremely large number of TFT and is manufactured using high-precision technology. Any bright dots that may appear on your display are intrinsic of the TFT manufacturing technology.