ICS Programmer for Kyosho ICS Mini-Z MR03 EVO MR04 EVO2 (stand alone programmer box) [JACKIERC]

Only MR-04 EVO2. MR-03 EVO cars.
*this does not work on Readysets,

This programmer is designed to be used with AAA Batteries no more than 1.5vdc per battery.
 
6.0vdc operation only  if you are using higher voltage LIPO or other voltages, it will short out the programmer 

Our prayers have been answered! No more fumbling around with a laptop and some windows updates!

This standalone programmer lets you change all the settings on the fly! You plug it in and load it into programming mode at your finger tips. You can adjust all the settings you normally need to access by using the ICS programmer that Kyosho doesn't even make anymore.
This is a must have! You can change your reverse delay and even steering and punch settings!
An amazing game changer for the MINI-Z world!

Update 3/26/2025:
v2.72 firmware update:
https://drive.google.com/file/d/1En9oo66zOQPajC2uJwJ_eQGhfkftFxUX/view?usp=drive_link

Release info:
You can now adjust your punch from 0-100 instead of the limited 10 step increment. 
Cancel the ST gyro mix and TH gyro mix settings, the default value of this setting on the PC software is 44 and 38,
Before updating to version V2.72, it is recommended to set the ST gyro mix to 44 and the TH gyro mix to 38 using the V2.6 or V2.71 version card to maintain consistency with the official settings.

All legacy settings for MR-03 EVO has not changed. Update only changes MR-04 EVO2 Programming.

===============================================

Update 3/23/2025:
v2.71 firmware update:

https://drive.google.com/file/d/1fRkMt1d1S-YaBUjH8emIHpEE1Ra0f4PT/view?usp=drive_link

Release info:
Updates your programmer to have the gyro mixing adjustments for
MR-04 EVO2. 

===============================================

The operation upgrade steps are as follows:

1. Download firmware to your computer and extract the file name suffix BIN
2. Through the USB digital reference line link to set the card's micro interface computer display U disk and open
3. Copy the BIN file to the settings folder for overwriting
4. Long press the OK key of the set card until finished
   (Note; If the digital line is connected to the computer, it does not display the U disk or does not respond, indicating that the digital line needs to be replaced)