Description

The next-generation steering system, SG Bell Crank set, is finally available now

By mounting the bell crank unit forward (3 degrees), the horizontal angle change of the tie rod during steering operation is minimized, and stable cornering characteristics are achieved. In addition, by mounting the ball for the tie rod in the horizontal direction, Ackerman adjustment with a spacer is also possible.

There are two types of lineup. For those who use a bell crank specification machine, prepared “bell crank specification set”, for those who use a slide rack specification machine, “Slide rack specification set” that includes the bridge and servo mount as bundled.

Please try this incredible SG bell crankset and SG knuckles that has not only the advantage of the bell crank but also the benefit of slide rack!

[Configuration of SG bell crank set]

Alu bell crank Right and Left (R/L 1 pc each)

Alu center link

Alu bell crank post (2pcs)

Alu bell crank base (3degree, 1pc)

King pin (2pcs)

・Φ7×Φ4 ball bearing (4pcs)

・Φ8×Φ5 ball bearing (4pcs

・Φ5, 0.1mm shims(2枚)

・Φ4, 0.1mm shims (2 pcs)

Instruction manual and parts list(1 set)

 

WE ARE A REVE-D DEALER! MORE REVE D PRODUCTS CAN BE SEEN BY CLICKING BELOW