{"title":"MXO Racing","description":"","products":[{"product_id":"futaba-s-fhss-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-sp-nt-v3","title":"Futaba S-FHSS Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-SP-NT V3","description":"Futaba S-FHSS Compatible 4 Channel MICRO Receiver For 1\/24 1\/27 [MXO RACING] RXC42-SP-NT V3\u003cbr\u003e\u003chr\u003e\u003cbr\u003eDimensions: 14.6 x 21.4 x 8.2\u003cbr\u003eCompatible Transmitter:\u003cbr\u003eFutaba: 7PX, 4PV, 3PV, 4PX\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Receiver\u003cbr\u003e3 x 1.5mm 3P JST plug wire pigtails","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44437461500143,"sku":"RXC42-SP-NT V3","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/IMG_5206.jpg?v=1706117310"},{"product_id":"sanwa-fh3-fh4-compatible-4-channel-wireless-internal-antenna-micro-receiver-for-1-24-1-28-mxo-racing-rxc42-sa-csanwa","title":"SANWA FH3 - FH4  Compatible 4 Channel WIRELESS (INTERNAL ANTENNA) MICRO Receiver For 1-24 1-28 [MXO RACING] RXC42-SA-C(SANWA)","description":"\u003cp\u003eSANWA FH3 \/ FH4 Compatible 4 Channel MICRO Receiver For 1\/24 1\/27 [MXO RACING] RXC42-SA-NT V2\u003cbr\u003e\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003eDimensions: 14.6 x 21.4 x 8.2\u003cbr\u003e \u003cbr\u003ePackage Included:\u003cbr\u003e1 x Receiver\u003cbr\u003e3 x 1.5mm 3P JST plug wire pigtails\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44437461762287,"sku":"RXC42-SA-C(SANWA)","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/IMG_5207.jpg?v=1706117314"},{"product_id":"futaba-s-fhss-compatible-with-gyro-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-sg-ntsfhss-gyro","title":"Futaba S-FHSS Compatible (WITH GYRO)  4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-SG-NT(SFHSS + GYRO)","description":"Futaba S-FHSS Compatible (WITH GYRO) 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1\/24 1\/27 [MXO RACING] RXC42-SG-NT(SFHSS)\u003cbr\u003e\u003chr\u003e\u003cbr\u003eDimensions: 14.6 x 21.4 x 8.2\u003cbr\u003eCompatible Transmitter:\u003cbr\u003eFutaba: 7PX, 4PV, 3PV, 4PX\u003cbr\u003ePackage Included:\u003cbr\u003e1 x Receiver (with integrated internal GYRO)\u003cbr\u003e3 x 1.5mm 3P JST plug wire pigtails","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44437784133871,"sku":"RXC42-SG-NT (GYRO)","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/Screen-Shot-2022-02-15-at-10.08.21-AM_1270x_34e0254a-c0a6-4e44-b433-a64df31ebdac.webp?v=1773169102"},{"product_id":"v2-futaba-s-fhss-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-case-less-mxo-racing-rxc42-s","title":"V2 Futaba S-FHSS Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC42-S","description":"\u003cp\u003eFutaba S-FHSS Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1\/24 1\/28 [MXO RACING] RXC42-S\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003cbr\u003e1)Modulation:Compatible all FUTABA-SFHSS\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44438129705199,"sku":"RXC42-S","price":42.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-S.jpg?v=1773169055"},{"product_id":"micro-transponder-compatible-w-easylap-mxo-racing-mx-tran-01","title":"v2 Micro Transponder (Compatible w- Easylap) [MXO Racing] MX Tran-01 (v2)","description":"Micro Transponder [MXO Racing] MX Tran-01\u003cbr\u003eCompatible with EASYLAP\u003cbr\u003e\u003ch1\u003eMX Tran-01 Manual\u003c\/h1\u003e\u003cbr\u003e\u003cdiv class=\"sdsarticle-des\"\u003e\n\u003cbr\u003e       Thank you for choosing the MXO-RACING products, please read this document carefully before using it!\u003cbr\u003eMX Tran-01 is an ultra-small-volume infrared transponder, which is suitable for the EasyLAP system.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eFeatures：\u003c\/strong\u003e\u003cbr\u003e* Ultra -small volume: 7.5*6.0*2.9mm;\u003cbr\u003e* Work voltage: 3.3 ~ 8.5V;\u003cbr\u003e* Personal ID number is programmable;\u003cbr\u003e* Personal ID range: 1 ~ 16777215;\u003cbr\u003e* Easy to install;\u003cbr\u003e* Universal.\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003ePower supply connector connection： \u003c\/strong\u003e\u003cbr\u003eThe working voltage of MX Trans-01 is 3.3 ~ 8.5V, so the power connector of MX Trans-01 can be connected to the servo interface of RXC42-X or on the communication port of the miniz, as shown in the figure below:\u003cbr\u003e\n\u003c\/div\u003e\u003cbr\u003e \u003cbr\u003e*\u003cstrong\u003eThe power connector of MX Trans-01 is connected to the communication port of MINI-Z (1.5mm 4P):\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/E5_9B_BE_E7_89_871.jpg?v=1706332474\"\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44452307828975,"sku":"MX Tran-01 (v2)","price":19.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/mxo-racing-micro-transponder.jpg?v=1706332471"},{"product_id":"futaba-sfhss-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-sp-tp","title":"FUTABA SFHSS Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-SP\u0026amp;TP","description":"FUTABA SFHSS Compatible 4 Channel MICRO WIRELESS Receiver + TRANSPONDER For 1\/24 1\/28 (CASE-LESS) [MXO RACING] RXC52-SP\u0026amp;TP\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44452349772015,"sku":"RXC52-SP\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/SPTP.jpg?v=1772330260"},{"product_id":"mini-z-evo-receiver-conversion-4ch-receiver-module-mxo-racing-evo-ba1","title":"MINI-Z EVO Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-BA1","description":"MINI-Z EVO Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-BA1\u003cbr\u003eMX EVO BA1 Manual\u003cbr\u003eMX EVO BA1 is a switching work mode product developed for MX EVO RX series products . After the MX EVO RX is installed in the EVO BA1 , the MX EVO RX works in the 4CH PWM standard signal mode .\u003cbr\u003eFeatures :\u003cbr\u003eSize: 16 . 2*15 . 2*6 . 5mm;\u003cbr\u003eWeight: 0 . 95g;\u003cbr\u003eWorking voltage: 3 . 5V ~ 8 . 5V;\u003cbr\u003eLet all products of MX EVO RX series output 4CH PWM signal;\u003cbr\u003eProvide online firmware interface for MX EVO RX series products (Note 1) .\u003cbr\u003eNote 1: MX EVO RX -SANWA V2 . 15 does not support online firmware upgrade , but can read firmware version and\u003cbr\u003eother information .\u003cbr\u003eInterface (EVO BA1 on the left, EVO BA1 with MX EVO RX-SANWA installed on the left):\u003cbr\u003eCH1: ST\u003cbr\u003eCH2: TH\u003cbr\u003eCH3: AUX1\u003cbr\u003eCH4: AUX2\/DATA(Online firmware upgrade interface)\u003cbr\u003eGUI download link: update . crossover -rx . com\/mxo .zip","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44452349968623,"sku":"EVO-BA1","price":12.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/evo-ba1.jpg?v=1706333860"},{"product_id":"mini-z-evo-receiver-conversion-4ch-receiver-module-mxo-racing-rx-sfhss","title":"MINI-Z EVO Futaba Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-SFHSS","description":"\u003cdiv\u003e\u003cstrong\u003eMX EVO RX -SFHSS Manual\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eThe MX EVO RX -SFHSS is a FUTABA -SFHSS compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -03EVO , with an output speed of up to 3 .4ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures ：\u003cbr\u003eSize: 13 . 5*10 . 0*3 . 5mm;\u003cbr\u003eWeight: 0 . 58g;\u003cbr\u003eWorking voltage: 3 . 0V or 3 . 3V;\u003cbr\u003eCompatible with Futaba -SFHSS protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 3 .4ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 3 .4\/6 . 8ms;\u003cbr\u003eSupport online firmware upgrade .\u003cbr\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003cbr\u003eThe picture below shows the EVO - BA1 on the left and the EVO - BA1 with the MX EVO RX installed on the right:\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44452350034159,"sku":"EVO-RX-SFHSS","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/mx-evo-rx-sfhss-1.jpg?v=1706333863"},{"product_id":"sanwa-fh4-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-sa-tp","title":"SANWA FH4 Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-SA\u0026TP","description":"\u003cp\u003eSANWA FH4 Compatible 4 Channel MICRO WIRELESS Receiver + TRANSPONDER For 1\/24 1\/28 (CASE-LESS) [MXO RACING] RXC52-SA\u0026amp;TP\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44457689841903,"sku":"RXC52-SA\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/SATP.jpg?v=1772330215"},{"product_id":"sanwa-fh5-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-f5-tp","title":"SANWA FH5 Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-F5\u0026amp;TP","description":"\u003cp\u003eV2 SANWA FH5 Compatible 4 Channel MICRO WIRELESS Receiver + TRANSPONDER For 1\/24 1\/28 (CASE-LESS) [MXO RACING] RXC52-F5\u0026amp;TP\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44457691021551,"sku":"RXC52-F5\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/F5TP.jpg?v=1772330247"},{"product_id":"nb4-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-a3-amp-tp","title":"NB4 Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-A3\u0026TP","description":"\u003cp\u003eNB4 Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-A3\u0026amp;TP\u003cbr\u003e*for flysky nb4\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.\u003cbr\u003edrz mrz rx28 glr glf1 mini-z evo\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44626970837231,"sku":"RXC52-A3\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/A3TP.jpg?v=1772330200"},{"product_id":"flysky-nb4-compatible-4-channel-micro-wireless-receiver-for-1-24-1-28-case-less-mxo-racing-rxc42-a3nb4","title":"FLYSKY NB4 Compatible 4 Channel MICRO WIRELESS  Receiver For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC42-A3(NB4)","description":"\u003cp\u003eFLYSKY NB4 Compatible 4 Channel MICRO WIRELESS Receiver For 1\/24 1\/28 (CASE-LESS) [MXO RACING] RXC42-A3(NB4\u003c\/p\u003e\n\u003cp\u003e1) For NB4 \u003cbr\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44626971164911,"sku":"RXC42-A3(NB4)","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-A3.jpg?v=1773169031"},{"product_id":"mini-z-evo-sanwa-fh4-receiver-conversion-4ch-receiver-module-mxo-racing-evo-rx-sanwa-fh4","title":"MINI-Z EVO SANWA FH4 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-SANWA-FH4","description":"\u003cp\u003eMINI-Z EVO SANWA FH4 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-SANWA-FH4\u003cbr\u003eThis MINI receiver module is for you to connect your EVO board to a SANWA Radio system that uses FH4 Communication.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003cbr\u003eit can be used for sanwa transmitter\u003cbr\u003eM12S,M12,MT44,MT4S,MT4,M11X etc.\u003cbr\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003cbr\u003eMX EVO RX-SANWA V2 . 15 Manual\u003cbr\u003eThe MX EVO RX -SANWA is a SANWA FH3\/FH4 compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -030EVO , with an output speed of up to 2 . 6ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures:\u003cbr\u003eSize: 10.5*10.0*3.5mm;\u003cbr\u003eWeight: 0.72g;\u003cbr\u003eWorking voltage: 3.0V or 3.3V;\u003cbr\u003eCompatible with SANWA FH3\/FH4 protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 2.6ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 5 .4ms;\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003cbr\u003eThe picture below shows the EVO - BA1 on the left and the EVO - BA1 with the MX EVO RX installed on the right:\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44627145162991,"sku":"EVO-RX-SA-FH4 v3","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/evo-sanwa-fh4.jpg?v=1710351698"},{"product_id":"mini-z-evo-sanwa-fh5-receiver-conversion-4ch-receiver-module-mxo-racing-evo-rx-sanwa-fh5","title":"MINI-Z EVO SANWA FH5 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-SANWA-FH5","description":"\u003cp\u003eMINI-Z EVO SANWA FH5 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-SANWA-FH5\u003cbr\u003eThis MINI receiver module is for you to connect your EVO board to a SANWA Radio system that uses FH4 Communication.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003cbr\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003cbr\u003eit can be used for sanwa transmitter that uses FH5\u003cbr\u003eMX EVO RX-SANWA V2 . 15 Manual\u003cbr\u003eThe MX EVO RX -SANWA is a SANWA FH5 compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -030EVO , with an output speed of up to 2 . 6ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures:\u003cbr\u003eSize: 10.5*10.0*3.5mm;\u003cbr\u003eWeight: 0.72g;\u003cbr\u003eWorking voltage: 3.0V or 3.3V;\u003cbr\u003eCompatible with SANWA FH5 protocol ONLY\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 2.6ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 5 .4ms;\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003cbr\u003eThe picture below shows the EVO - BA1 on the left and the EVO - BA1 with the MX EVO RX installed on the right:\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44627145261295,"sku":"EVO-RX-SANWA-FH5","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/evo-sanwa-fh5.jpg?v=1710351701"},{"product_id":"mini-z-evo-spektrum-dsm2-receiver-conversion-4ch-receiver-module-mxo-racing-evo-x-dsm2","title":"MINI-Z EVO SPEKTRUM DSM2 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-DSM2","description":"\u003cp\u003eMINI-Z EVO SPEKTRUM DSM2 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-DSM2\u003cbr\u003eThis MINI receiver module is for you to connect your EVO board to a SPEKTRUM Radio system that uses DSM2 Communication.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cspan data-spm-anchor-id=\"a2g0o.detail.1000023.i0.5785QHs7QHs76S\"\u003eDX2E, DX3C, DX4S, DX5C, DX5-Pro, DX5 Rugged\u003c\/span\u003e\u003cbr\u003e\n\u003cdiv align=\"center\"\u003e\u003cstrong\u003eMX EVO RX - DSM2 Manual\u003c\/strong\u003e\u003c\/div\u003e\n\u003cbr\u003eThe  MX  EVO  RX - DSM2  is  a  DSM\/DSM2  compatible  ultra - miniature  receiver  for  KYOSHO's MR -030EVO and MA -030EVO , with an output speed of up to 5 . 5\/8 . 25ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures ：\u003cbr\u003eSize: 13 . 5*10 . 0*3 . 5mm;\u003cbr\u003eWeight: 0 . 58g;\u003cbr\u003eWorking voltage: 3 . 0V or 3 . 3V;\u003cbr\u003eCompatible with DSM\/DSM2 protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 5 . 5\/8 . 25ms(Note 1);\u003cbr\u003eThe output speed in 4CH PWM mode is 5 . 5\/8 . 25ms(Note 1);\u003cbr\u003eSupport online firmware upgrade .\u003cbr\u003eNote 1: The actual output speed is determined by the type of SPEKTRUM transmitter;\u003cbr\u003eBind Operation:\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003cbr\u003eThe picture below shows the EVO - BA1 on the left and the EVO - BA1 with the MX EVO RX installed on the right:\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44627145359599,"sku":"EVO-RX-DSM2","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/products\/RX-DSm2.webp?v=1710351704"},{"product_id":"micro-1-28-nano-20a-brushless-esc-mxo-racing-erun-20a","title":"Micro 1-28 NANO 20A Brushless ESC [MXO Racing] ERUN-20A","description":"ERUN-20A is an ultra-small sensorless brushless ESC for RC cars. Its volume is much smaller than similar products, so users can easily install it on 1\/28~1\/24 RC cars.\u003cbr\u003e\u003cstrong\u003eFeatures：\u003c\/strong\u003e\u003cbr\u003eUltra small size：21.5*12.5*7.0mm；\u003cbr\u003eWeight：2.25g； l BEC：2.0A\/5V；\u003cbr\u003eWorking voltage: 6.0~12.4V；\u003cbr\u003eWorking current：20A\/40A(Max)；\u003cbr\u003eSupport THR range and midpoint setting；\u003cbr\u003e3 running modes：F\u0026amp;B, F\/R\u0026amp;B, F\/R；\u003cbr\u003e4 steps of maximum reverse force adjustment；\u003cbr\u003e9 start modes from \"Short\" to \"Smooth\" to be suitable for different chassis, tires and tracks；\u003cbr\u003eProportional ABS brake function with 4 steps of maximum brake force adjustment；\u003cbr\u003e8 steps of drag brake force adjustment and 4 steps of initial brake force adjustment；\u003cbr\u003eSupport Low voltage cut-off protection for Li_Po or nickel battery；\u003cbr\u003eSupport Over-heat protection \/ THR signal loss protection \/ Motor blocked protection；\u003cbr\u003e8 steps of timing adjustment；\u003cbr\u003e10 programmable parameters；\u003cbr\u003e1.5mm 3P servo connector；\u003cbr\u003e \u003cbr\u003e\u003cstrong\u003eInterface：\u003c\/strong\u003e\u003cbr\u003e\u003cimg src=\"https:\/\/store.mxo-rc.com\/img\/cms\/Receiver\/EURN20A\/3fc9474ae41fc4f8f1e878aa2ecc41c.png\" alt=\"\" width=\"637\" height=\"165\"\u003e\u003cbr\u003e \u003cbr\u003eManual here:\u003cbr\u003ehttps:\/\/rtrc-onlines.com\/wp-content\/uploads\/2021\/12\/ERUN-20A-V1.0-Manual.pdf","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":44805313691887,"sku":"ERUN-20A","price":27.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/mxo-racing-erun-20a-brushless-esc.jpg?v=1712458305"},{"product_id":"rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x","title":"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE","description":"\u003cp\u003eRXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\u003c\/p\u003e\n\u003cp\u003e*This is ONLY the case, actual receiver is sold separately.\u003c\/p\u003e\n\u003cp\u003eMXO-Racing Micro NANO Receiver Plastic Shell Suitable for Receivers Up To 18.7mm Long and 12mm Wide\u003cbr\u003eNotice\u003cbr\u003eWhen installing this product, you need to use CA quick-drying glue for bonding. and need to trim the pins on the back of the micro receiver\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":45780344176879,"sku":"RXC42-X ABS CASE","price":4.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839.webp?v=1724786184"},{"product_id":"tran02-micro-transponder-compatible-w-easylap-mxo-racing-mx-tran-02","title":"MX-Tran-02 Micro Transponder (Compatible w- Easylap) [MXO Racing] MX Tran-02","description":"\u003cp\u003eMX-Tran-02 Micro Transponder (Compatible w- Easylap) [MXO Racing] MX Tran-02\u003cbr\u003eCompatible with EASYLAP\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eMX Tran-02 is an ultra-small infrared transponder that can be directly installed on the gyro position of MINIZ, and it is suitable for EASYLAP system.\u003cbr\u003e\u003cbr\u003eFeatures：\u003cbr\u003e* Ultra -small volume: 7.5*6.0*2.9mm; \u003cbr\u003e*Work voltage: 3.3 ~ 8.5V; \u003cbr\u003e*Personal ID number is programmable; \u003cbr\u003e*Personal ID range: 1 ~ 16777215; \u003cbr\u003e*Easy to install;\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/TRAN-01_V2-1__1.jpg?v=1732205596\"\u003e\u003cimg\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46059527438575,"sku":"Mx-Tran02","price":22.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/021-6b9a.webp?v=1732205482"},{"product_id":"mx-nano-micro-transponder-compatible-w-easylap-mxo-racing-mx-nano-tran-black","title":"MX Nano Ultra-Micro Transponder (Compatible w- Easylap) [MXO Racing] MX-NANO-Tran-BLACK","description":"\u003cp\u003eMX Nano Micro Transponder (Compatible w- Easylap) [MXO Racing] MX-NANO-Tran-BLACK\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ethis does not work with a regular box stock mini z  \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cp\u003e      * Ultra -small volume: 11.2*8.0*3.8mm(including shell);\u003c\/p\u003e\n\u003cp\u003e      * Work voltage: 3.3 ~ 8.5V;\u003c\/p\u003e\n\u003cp\u003e      * Personal ID number is programmable;\u003c\/p\u003e\n\u003cp\u003e      * Personal ID range: 1 ~ 16777215;\u003c\/p\u003e\n\u003cp\u003e      * Easy to install;\u003c\/p\u003e\n\u003cp\u003e      * Universal.\u003c\/p\u003e\n\u003cp\u003e      * Suitable for EASYLAP System and MXO Wireless LAP System.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/MX_Nano_TRAN_2-0__1.jpg?v=1732205804\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg\u003e\u003c\/p\u003e\n\u003cmeta charset=\"utf-8\"\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46059532845295,"sku":"MX-NANO-Tran-Black","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/mxo-racing-mx-nano-tran-micro-transponder.jpg?v=1732205844"},{"product_id":"rxc52-abs-shell-smoke-black-transparent-mxo-racing-rxc52-abs-black","title":"RXC52 ABS Shell SMOKE (Black Transparent) Case Enclosure [MXO RACING] RXC52-ABS-BLACK","description":"\u003cp\u003eRXC52 ABS Shell SMOKE (Black Transparent) Case Enclosure [MXO RACING] RXC52-ABS-BLACK\u003c\/p\u003e\n\u003cp\u003eSmoke colored ABS housing for RXC52 Series MXO Receivers.\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46059536285935,"sku":"RXC52-ABS-BLACK","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/s962716395837806090_p3899_i3_w800.webp?v=1732206076"},{"product_id":"rxc52-abs-shell-clear-transparent-case-enclosure-mxo-racing-rxc52-abs-clear","title":"RXC52 ABS Shell CLEAR (Transparent) Case Enclosure [MXO RACING] RXC52-ABS-CLEAR","description":"\u003cp\u003eRXC52 ABS Shell CLEAR (Transparent) Case Enclosure [MXO RACING] RXC52-ABS-CLEAR\u003c\/p\u003e\n\u003cp\u003eCLEAR ABS housing for RXC52 Series MXO Receivers.\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46384984457455,"sku":"RXC52-ABS-CLEAR","price":6.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC52-ABS-Clear.jpg?v=1744330857"},{"product_id":"mini-z-evo-nb4-receiver-conversion-4ch-receiver-module-mxo-racing-evo-rx-nb4","title":"MINI-Z EVO NB4 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-NB4","description":"\u003cp\u003eMINI-Z EVO NB4 Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-NB4\u003cbr\u003eThis MINI receiver module is for you to connect your EVO board to a NB4\/NB4+ Radio \u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003cbr\u003eit can be used for NB4 transmitter\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe MX EVO RX NB4 compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -030EVO , with an output speed of up to 2 . 6ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures:\u003cbr\u003eSize: 10.5*10.0*3.5mm;\u003cbr\u003eWeight: 0.72g;\u003cbr\u003eWorking voltage: 3.0V or 3.3V;\u003cbr\u003eCompatible with SANWA FH3\/FH4 protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 2.6ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 5 .4ms;\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46811007320303,"sku":"EVO-RX-NB4","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/EVO-RX-NB4.jpg?v=1756871875"},{"product_id":"futaba-4g-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-f4g-tp","title":"FUTABA 4G Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-F4G\u0026TP","description":"\u003cp\u003eFUTABA 4G Compatible 4 Channel MICRO WIRELESS  Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-F4G\u0026amp;TP\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46811355807983,"sku":"RXC52-F4G\u0026TP","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RCX-FU.jpg?v=1756878055"},{"product_id":"futaba-4g-compatible-4-channel-micro-wireless-nbsp-receiver-for-1-24-1-28-case-less-mxo-racing-rxc52-f4g","title":"FUTABA 4G Compatible 4 Channel MICRO WIRELESS \u0026nbsp;Receiver For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-F4G","description":"\u003cp\u003eFUTABA 4G Compatible 4 Channel MICRO WIRELESS  Receiver For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-F4G\u003c\/p\u003e\n\u003cp\u003eMicro 4G Futaba compatible receiver. For 4G (10px) radios.\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46811400962287,"sku":"RXC52-F4G","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC-52-4G.jpg?v=1756877771"},{"product_id":"mini-z-evo-4g-futaba-receiver-conversion-4ch-receiver-module-mxo-racing-evo-rx-f4g","title":"MINI-Z EVO 4G Futaba Receiver Conversion 4CH Receiver Module [MXO RACING] EVO-RX-F4G","description":"\u003cdiv\u003e\u003cstrong\u003eMX EVO RX -SFHSS Manual\u003c\/strong\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003eThe MX EVO 4G is a FUTABA -4G compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -03EVO , with an output speed of up to 3 .4ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eFeatures ：\u003cbr\u003eSize: 13 . 5*10 . 0*3 . 5mm;\u003cbr\u003eWeight: 0 . 58g;\u003cbr\u003eWorking voltage: 3 . 0V or 3 . 3V;\u003cbr\u003eCompatible with Futaba -SFHSS protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 3 .4ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 3 .4\/6 . 8ms;\u003cbr\u003eSupport online firmware upgrade .\u003cbr\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing .\u003cbr\u003ePower on the transmitter , then set it to SFHSS mode (if it is already in SFHSS mode , ignore this step) , wait for a few seconds , when the LED on the receiver changes from fast flashing to steady light , it means BIND is successful and the receiver is already in normal mode .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003cbr\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003eTH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003eTH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003eTH \u0026gt;REV\u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -03EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003cbr\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003cbr\u003eHow the MX EVO RX works in 4CH PWM mode:\u003cbr\u003eWhen users install MX EVO RX on EVO - BA1 or other products that support 4CH PWM mode , MX EVO RX will work in 4CH PWM mode .\u003cbr\u003eIn 4CH PWM mode , when the MX EVO RX is just powered on , the LED on the RX will flash several times quickly and then enter the working mode , but the green LED will be off .\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46811433500911,"sku":"EVO-RX-F4G","price":59.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/EVO-4G.jpg?v=1756878282"},{"product_id":"flysky-nb4-module-1a-2a-fhss-same-as-rm005-mxo-rf201-a","title":"NB4 Module (1A 2A FHSS) Same as RM005 [MXO Racing]  MXO-RF201-A","description":"\u003cp\u003eNB4 Module (1A 2A FHSS) Same as RM005 [MXO]  RF201-A\u003c\/p\u003e\n\u003cdiv class=\"product__content\"\u003e\n\u003cp\u003eMXO Racing FlySky NB4 Module RF201-A\u003c\/p\u003e\n\u003cp\u003eThis module is for the NB4 handle so you can use Flysky protocol:\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003eFLYSKY-1A,                         \u003cbr\u003eFLYSKY-2A,               \u003cbr\u003eKYOSHO-FHSS\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46936914854127,"sku":"MXO-RF201-A","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/MXO-RF201-A-600x769.jpg?v=1760116812"},{"product_id":"nb4-module-asf-mhs-same-as-rm005-mxo-racing-mxo-rf201-k","title":"NB4 Module (ASF MHS) Same as RM005 [MXO Racing]  MXO-RF202-K","description":"\u003cp\u003eNB4 Module (ASF MHS) Same as RM005 [MXO Racing]  MXO-RF202-K\u003c\/p\u003e\n\u003cdiv class=\"product__content\"\u003e\n\u003cp\u003eMXO Racing FlySky NB4 Module RF201-K\u003c\/p\u003e\n\u003cp\u003eThis module is for the NB4 handle so you can use Flysky protocol:\u003c\/p\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003eKO-ASF,                              \u003c\/div\u003e\n\u003cdiv class=\"woocommerce-tabs wc-tabs-wrapper\"\u003eKO-MHS\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003c\/div\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":46936962597103,"sku":"MXO-RF202-K","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/MXO-RF202-K.png?v=1760118015"},{"product_id":"mini-z-evo-kyosho-kt-531p-kt-431p-mr-03evo-ma-030evo-receiver-conversion-receiver-module-mxo-racing-evo-rx-kyfhss","title":"MINI-Z EVO Kyosho FHSS KT-531P KT-432P (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-KYFHSS","description":"\u003cp\u003eMINI-Z EVO Kyosho FHSS KT-531P KT-432P (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-KYFHSS\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eit can be used for KYOSHO Transmitter \u003c\/span\u003e\u003cspan\u003eKT-531P, KT-432P\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThe MX EVO RX - KYFHSS is a KYOSHO FHSS compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -030EVO , with an output speed of up to 1 . 925ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eIn addition , we are developing miniature sensor brushless ESCs and other related products that can be directly mounted on this receiver .\u003c\/p\u003e\n\u003cp\u003eFeatures ：\u003cbr\u003eSize: 13 . 5*10 . 0*3 . 5mm;\u003cbr\u003eWeight: 0 . 58g;\u003cbr\u003eWorking voltage: 3 . 0V or 3 . 3V;\u003cbr\u003eCompatible with KYOSHO FHSS protoco(KT -531P , KT -432P)l;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 1 . 925ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 3 . 85ms;\u003cbr\u003eSupport online firmware upgrade .\u003c\/p\u003e\n\u003cp\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing , and then proceed according to the BIND operation requirements of the transmitter . When the red LED on the RX changes from fast When the blinking turns to steady light , it means BIND is successful and the signal has been received .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003c\/p\u003e\n\u003cp\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003e \u003cbr\u003eHow to set up the transmitter (when MX EVO RX is used on MR -03EVO\/MA -03EVO):\u003cbr\u003eBecause the brushless ESCs and servos on MR -03EVO\/MA -03EVO cannot set the midpoint and end point , the user can only set the transmitter to adapt to the parameters of MR -03EVO\/MA -03EVO . The settings are as follows:\u003cbr\u003e1）TH TYPE    \u0026gt;   F5 : B5\u003cbr\u003e2）EAP: ST \u0026gt;L150% R150%\u003cbr\u003e                TH \u0026gt;H150% B150%\u003cbr\u003e3）D\/R:  ST \u0026gt;100%\u003cbr\u003e                TH \u0026gt;100%\u003cbr\u003e4）REV: ST \u0026gt;REV\u003cbr\u003e               TH \u0026gt;REV\u003cbr\u003e \u003cbr\u003eNote: Points 2 and 3 can be adjusted according to user habits .\u003c\/p\u003e\n\u003cp\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -030EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003c\/p\u003e\n\u003cp\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -030EVO Add a small piece of sponge to hold down the MX EVO RX .\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825802232047,"sku":"EVO-RX-KYFHSS","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/d1ded93462dd34c33c7d2c2b71f78b7-a98f.webp?v=1772324711"},{"product_id":"mini-z-evo-ko-asf-mr-03evo-ma-030evo-receiver-conversion-receiver-module-mxo-racing-evo-rx-asf","title":"MINI-Z EVO KO ASF (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-ASF","description":"\u003cp\u003eMINI-Z EVO KO ASF (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-ASF\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eit can be used for \u003cbr\u003eKO ASF TRANSMITTER KT-18, KO EX-1 ASF\/EX-6\/EX-6R, 901SM\/902SM\u003c\/span\u003e\u003c\/p\u003e\n\u003cdiv\u003e\n\u003cbr\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/div\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eThis is the receiver for KYOSHO MR-03EVO and MA-030EVO\u003cbr\u003eit can be used for KO ASF transmitter\u003cbr\u003eKT-18, KO EX-1 ASF\/EX-6\/EX-6R, 901SM\/902SM\u003cbr\u003eMX EVO RX -ASF Manual\u003cbr\u003eThe MX EVO RX -ASF is a ASF compatible ultra - miniature receiver for KYOSHO's MR -03EVO and MA -030EVO , with an output speed of up to 2 . 05ms in EVO mode . It can work not only in EVO mode , but also in 4CH PWM standard signal mode .\u003cbr\u003eIn addition , we are developing miniature sensor brushless ESCs and other related products that can be directly mounted on this receiver .\u003c\/p\u003e\n\u003cp\u003eFeatures ：\u003cbr\u003eSize: 13 . 5*10 . 0*3 . 5mm;\u003cbr\u003eWeight: 0 . 58g;\u003cbr\u003eWorking voltage: 3 . 0V or 3 . 3V;\u003cbr\u003eCompatible with ASF protocol;\u003cbr\u003eSupport EVO and 4CH PWM two working modes;\u003cbr\u003eThe output speed in EVO mode is 2 . 05ms;\u003cbr\u003eThe output speed in 4CH PWM mode is 4 . 1ms;\u003cbr\u003eSupport online firmware upgrade .\u003c\/p\u003e\n\u003cp\u003eBind Operation:\u003cbr\u003eInstall the MX EVO RX first , then power on the receiver and press the BIND switch until the red LED on the RX changes from slow flashing to fast flashing , and then proceed according to the BIND operation requirements of the transmitter . When the red LED on the RX changes from fast When the blinking turns to steady light , it means BIND is successful and the signal has been received .\u003cbr\u003eRed LED status indication:\u003cbr\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003cbr\u003e1) When the red LED flashes slowly , it means that RX is waiting to receive a signal;\u003cbr\u003e2) When the red LED flashes quickly , it means RX is in BIND mode;\u003cbr\u003e3) When the red LED is always on , it means that the RX has received the signal stably .\u003c\/p\u003e\n\u003cp\u003eGreen LED status indication:\u003cbr\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003cbr\u003e1) When the green LED is on , it means the RX is working in EVO mode;\u003cbr\u003e2) When the green LED is off , it means that the RX is working in 4CH PWM mode;\u003cbr\u003e \u003cbr\u003eHow the MX EVO RX works in EVO mode:\u003cbr\u003eWhen users install MX EVO RX on KYOSHO's MR -03EVO\/MA -030EVO frame or other products that support EVO mode , MX EVO RX will work in EVO mode .\u003cbr\u003eIn EVO mode , when the MX EVO RX is just powered on , the LED on the RX will not flash quickly , but the green LED will light up .\u003c\/p\u003e\n\u003cp\u003eNote: When using the MX EVO RX on the MR -03EVO\/MA -03EVO , be sure to install it in place , otherwise you may burn it; if necessary , place the receiver compartment cover on the MR -03EVO\/ MA -03EVO Add a small piece of sponge to hold down the MX EVO RX .\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825829429487,"sku":"EVO-RX-ASF","price":44.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/1ff86d3626124c1d2fc403db20a6afd-1883_1.webp?v=1772325118"},{"product_id":"mini-z-evo-flysky-afhds-1a-2a-mr-03evo-ma-030evo-receiver-conversion-receiver-module-mxo-racing-evo-rx-fxsa","title":"MINI-Z EVO FLYSKY AFHDS-1A\/2A (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-FXSA","description":"\u003cp\u003eMINI-Z EVO FLYSKY AFHDS-1A\/2A (MR-03EVO\/MA-030EVO) Receiver Conversion Receiver Module [MXO RACING] EVO-RX-FXSA\u003c\/p\u003e\n\u003cp\u003eThe MX EVO RX-FSXA is a FLYSKY AFHDS-1A\/2A compatible ultra-miniature receiver for KYOSHO's MR-03EVO and MA-03EVO, with an output speed of up to 3.0\/3.85ms in EVO mode. It can work not only in EVO mode, but also in 4CH PWM standard signal mode.\u003c\/p\u003e\n\u003cp\u003eIn addition, we are developing miniature sensor brushless ESCs and other related products that can be directly mounted on this receiver.\u003c\/p\u003e\n\u003cp\u003eFeatures：\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003el Size: 13.5*10.0*3.5mm; \u003c\/p\u003e\n\u003cp\u003el Weight: 0.58g;\u003c\/p\u003e\n\u003cp\u003el Working voltage: 3.0V or 3.3V; \u003c\/p\u003e\n\u003cp\u003el Compatible with FLYSKY AFHDS-1A\/2A protocol;\u003c\/p\u003e\n\u003cp\u003el Support EVO and 4CH PWM two working modes;\u003c\/p\u003e\n\u003cp\u003el The output speed in EVO mode is 3.0ms(AFHDS-1A)\/3.85ms(AFHDS-2A)\u003c\/p\u003e\n\u003cp\u003el The output speed in 4CH PWM mode is 6.0ms(AFHDS-1A)\/7.7ms(AFHDS-2A);\u003c\/p\u003e\n\u003cp\u003el Support online firmware upgrade.\u003c\/p\u003e\n\u003cp\u003eRed LED status indication:\u003c\/p\u003e\n\u003cp\u003eThe red LED on the MX EVO RX is an indication of the working status of the RX:\u003c\/p\u003e\n\u003cp\u003e1) When the red LED flashes slowly, it means that RX is waiting to receive a signal;\u003c\/p\u003e\n\u003cp\u003e2) When the red LED flashes quickly, it means RX is in BIND mode;\u003c\/p\u003e\n\u003cp\u003e3) When the red LED is always on, it means that the RX has received the signal stably.\u003c\/p\u003e\n\u003cp\u003eGreen LED status indication:\u003c\/p\u003e\n\u003cp\u003eThe green LED on the MX EVO RX is an indication of the RX operating mode:\u003c\/p\u003e\n\u003cp\u003e1) When the green LED is on, it means the RX is working in EVO mode;\u003c\/p\u003e\n\u003cp\u003e2) When the green LED is off, it means that the RX is working in 4CH PWM mode;\u003c\/p\u003e\n\u003cp\u003eHow to set up the transmitter (when MX EVO RX is used on MR-03EVO\/MA-03EVO):\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBecause the brushless ESCs and servos on MR-03EVO\/MA-03EVO cannot set the midpoint and end point, the user can only set the transmitter to adapt to the parameters of MR-03EVO\/MA-03EVO. The settings are as follows:\u003c\/p\u003e\n\u003cp\u003e1）TH TYPE  \u0026gt;  F5 : B5\u003c\/p\u003e\n\u003cp\u003e2）EAP:  ST  \u0026gt;  L150%   R150%\u003c\/p\u003e\n\u003cp\u003e             TH  \u0026gt;  H150%  B150%\u003c\/p\u003e\n\u003cp\u003e3）D\/R:  ST  \u0026gt;  100%   \u003c\/p\u003e\n\u003cp\u003eTH  \u0026gt;  100%\u003c\/p\u003e\n\u003cp\u003eNote: Points 2 and 3 can be adjusted according to user habits.\u003c\/p\u003e\n\u003cp\u003eHow to switch AFHDS-1A\/2A protocol:\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhen the user uses the transmitter of AFHDS-1A protocol to BIND, the MX EVO RX-FSXA works in AFHDS-1A mode after the BIND is successful;\u003c\/p\u003e\n\u003cp\u003eWhen the user uses the AFHDS-2A protocol transmitter to BIND, the MX EVO RX-FSXA works in AFHDS-2A mode after the BIND is successful;\u003c\/p\u003e\n\u003cp\u003eHow the MX EVO RX works in EVO mode:\u003c\/p\u003e\n\u003cp\u003eWhen users install MX EVO RX on KYOSHO's MR-03EVO\/MA-03EVO frame or other products that support EVO mode, MX EVO RX will work in EVO mode.\u003c\/p\u003e\n\u003cp\u003eIn EVO mode, when the MX EVO RX is just powered on, the LED on the RX will not flash quickly, but the green LED will light up.\u003c\/p\u003e\n\u003cp\u003eNote: When using the MX EVO RX on the MR-03EVO\/MA-03EVO, be sure to install it in place, otherwise you may burn it; if necessary, place the receiver compartment cover on the MR-03EVO\/ MA-03EVO Add a small piece of sponge to hold down the MX EVO RX.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825841750255,"sku":"EVO-RX-FXSA","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/1ff86d3626124c1d2fc403db20Fa6afd-ca23.webp?v=1772325304"},{"product_id":"flysky-afhds-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-a1","title":"FLYSKY AFHDS Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-A1","description":"\u003cp\u003eFLYSKY AFHDS Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-A1\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e1)Modulation:Compatible FlySky AFHDS\u003c\/span\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825913250031,"sku":"RXC42-A1","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-A1_0a0b6ba4-e6cc-4d9e-b944-b11d9cbe2220.jpg?v=1773168952"},{"product_id":"flysky-afhds-2a-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-a2","title":"FLYSKY AFHDS 2A  Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-A2","description":"\u003cp\u003eFLYSKY AFHDS 2A  Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-A2\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e1)Modulation:Compatible FlySky AFHDS 2A\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825920393455,"sku":"RXC42-A2","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-A2.jpg?v=1773168929"},{"product_id":"kyosho-asf-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-k1","title":"KYOSHO ASF Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-K1","description":"\u003cp\u003eKYOSHO ASF  Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-K1\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e1)Modulation:Compatible KYOSHO 2.4GHz ASF\u003cbr\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825930485999,"sku":"RXC42-K1","price":39.99,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-K1.jpg?v=1773168910"},{"product_id":"kyosho-fhss-v2-compatible-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-k2","title":"KYOSHO FHSS (KT-531P\/KT-432PT) V2 Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-K2","description":"\u003cp\u003eKYOSHO FHSS (KT-531P\/KT-432PT) V2 Compatible 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-K2\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e1)Modulation:Compatible KYOSHO 2.4GHz FHSS V2 (KT-531P or KT-432PT)\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003cp\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003eBind and Failsafe\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePower on your transmitter and receiver. Adjust transmitter each channel to the exact position you want to have in failsafe mode. Transmitter set to pair mode. Receiver led should be on. Long press the pair button. After around 2 seconds the LED will turn to fast flashing first then turn to on status again. Now the pairing is done and the failsafe data is saved. Power off the transmitter and receiver then power on again then the receiver will work.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e*This receiver does \u003cstrong\u003enot\u003c\/strong\u003e include a case, you can purchase one if you would like to use it. Some people use heatshrink, some don't even use a case\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/supergdrift.com\/products\/rxc42-x-abs-plastic-case-for-1-24-1-28-case-less-receiver-mxo-racing-rxc42-x\"\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/supergdrift.com\/cdn\/shop\/files\/mxo-mxo-rxc42-x-shell-28636942073933_900x_aee4f76f-69df-4d62-b7a8-a2d7d4356839_900x.webp?v=1724786184\" alt=\"RXC42-X ABS Plastic Case For 1-24 1-28 (CASE-LESS Receiver) [MXO RACING] RXC42-X ABS CASE\" width=\"134\" height=\"141\"\u003e\u003c\/span\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825948868847,"sku":"RXC42-K2","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RXC42-K2.jpg?v=1773168838"},{"product_id":"flysky-afhds-built-in-gyro-nano-kt-432pt-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-ag","title":"FLYSKY AFHDS Built-in GYRO NANO (KT-432PT) 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-AG","description":"\u003cp\u003eFLYSKY AFHDS Built-in GYRO NANO (KT-432PT) 4 Channel MICRO WIRELESS (Internal Antenna) Receiver For 1-24 1-28 [MXO RACING] RXC42-AG\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e1)Modulation:Compatible For Racing 1\/28 RC Car (Not suitable for drift cars)\u003cbr\u003eFLYSKY GT2，GT2B，GT2E，GT2F，GT2G，GT5\u003cbr\u003eFLYSKY GT3B，GT3C，IT4S\u003cbr\u003eFLYSKY I4X，I6，I6X，CT6B，T6，\u003cbr\u003eFLYSKY TH9X，TH9A，TM10，I8，I10\u003cbr\u003eKYOSHO KT-432PT\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e2)Small size:   21.5*14.6*6.5mm\u003cbr\u003e3)Super light: 2.4g(including antenna)\u003cbr\u003e4)Working voltage:3.7~8.4V\u003cbr\u003e5)High performance CPU enhance exactness control feeling\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825978654959,"sku":"RXC42-AG","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/212ec7295c.webp?v=1772327315"},{"product_id":"kyosho-kt-531p-built-in-gyro-nano-kt-432pt-4-channel-micro-wireless-internal-antenna-receiver-for-1-24-1-28-mxo-racing-rxc42-fg","title":"KYOSHO KT-531P Built-in GYRO NANO (KT-432PT) 4 Channel MICRO Receiver For 1-24 1-28 [MXO RACING] RXC42-FG","description":"\u003cp\u003eKYOSHO KT-531P Built-in GYRO NANO (KT-432PT) 4 Channel MICRO Receiver For 1-24 1-28 [MXO RACING] RXC42-FG\u003c\/p\u003e\n\u003chr\u003e\n\u003cp\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeatures\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eFor Racing 1\/28 RC Car (Not suitable for drift cars)\u003cbr\u003eKYOSHO FHSS NANO Built-in GYRO 4CH RX V3.0 FOR KT-531P\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/81e6715318.webp?v=1772327682\" alt=\"\"\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47825999692015,"sku":"RXC42-FG","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/kyKT531P-0ce8_1.webp?v=1772327623"},{"product_id":"dsm-dsm2-compatible-4-channel-micro-wireless-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-dp-tp","title":"DSM DSM2 Compatible 4 Channel MICRO Tower Antenna Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-DP\u0026TP","description":"\u003cp\u003eDSM DSM2 Compatible 4 Channel MICRO Tower Antenna Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-DP\u0026amp;TP\u003c\/p\u003e\n\u003cp\u003e✅ Compatible SPEKTRUM Transmitters:\u003cbr\u003eDX2E, DX3C, DX4S, DX5C, DX5-Pro, DX5 Rugged\u003c\/p\u003e\n\u003cp\u003eMXO-RACING RXC52-DG\u0026amp;TP Miniature Surface Receiver with Transponder \u0026amp; Multi-Gyro\u003cbr\u003eUser Manual\u003c\/p\u003e\n\u003cp\u003eThank you for choosing MXO-RACING products. Please read this document carefully before use.\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003cbr\u003eThe RXC52-DG\u0026amp;TP is a miniature antennaless surface receiver integrated with a Transponder and Multi-Gyro. It is compatible with SPEKTRUM DSM\/DSM2 protocols and is designed for high-speed, low-latency applications such as 1:24\/1:28 RC cars or MINIZ platforms.\u003c\/p\u003e\n\u003cp\u003eThis receiver features adaptive output speed (up to 5.5ms) and includes a built-in high-gain LNA for extended working range and fast response time.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eSize: 19.6 × 12.0 × 7.0 mm\u003c\/p\u003e\n\u003cp\u003eWeight: 1.35 g\u003c\/p\u003e\n\u003cp\u003eOperating Voltage: 3.3 ~ 8.5 V\u003c\/p\u003e\n\u003cp\u003eProtocol: Compatible with DSM\/DSM2\u003c\/p\u003e\n\u003cp\u003eBuilt-in LNA for improved distance and responsiveness\u003c\/p\u003e\n\u003cp\u003eBuilt-in Transponder with editable personal ID (range: 1 ~ 16,777,215)\u003c\/p\u003e\n\u003cp\u003eParallel high-speed output\u003c\/p\u003e\n\u003cp\u003eAdaptive output speed (e.g., 5.5ms with DX4S, 8.25ms with DX5C)\u003c\/p\u003e\n\u003cp\u003eBuilt-in Multi-Gyro (only in RXC52-DG\u0026amp;TP)\u003c\/p\u003e\n\u003cp\u003eSupports online firmware upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47826034753775,"sku":"RXC52-DP\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/RX-b180.jpg?v=1772328160"},{"product_id":"dsm-dsm2-compatible-4-channel-micro-tower-antenna-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-dg-tp","title":"DSM DSM2 Compatible 4 Channel MICRO Tower Antenna Receiver w GYRO + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-DG\u0026TP","description":"\u003cp\u003eDSM DSM2 Compatible 4 Channel MICRO Tower Antenna Receiver w GYRO + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-DG\u0026amp;TP\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003e✅ \u003c\/span\u003e\u003cstrong data-end=\"967\" data-start=\"931\"\u003eCompatible SPEKTRUM Transmitters\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003cbr data-end=\"971\" data-start=\"968\"\u003e\u003cspan\u003eDX2E, DX3C, DX4S, DX5C, DX5-Pro, DX5 Rugged\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eMXO-RACING RXC52-DG\u0026amp;TP Miniature Surface Receiver with Transponder \u0026amp; Multi-Gyro\u003cbr\u003eUser Manual\u003c\/p\u003e\n\u003cp\u003eThank you for choosing MXO-RACING products. Please read this document carefully before use.\u003c\/p\u003e\n\u003cp\u003eProduct Overview\u003cbr\u003eThe RXC52-DG\u0026amp;TP is a miniature antennaless surface receiver integrated with a Transponder and Multi-Gyro. It is compatible with SPEKTRUM DSM\/DSM2 protocols and is designed for high-speed, low-latency applications such as 1:24\/1:28 RC cars or MINIZ platforms.\u003c\/p\u003e\n\u003cp\u003eThis receiver features adaptive output speed (up to 5.5ms) and includes a built-in high-gain LNA for extended working range and fast response time.\u003c\/p\u003e\n\u003cp\u003eKey Features\u003cbr\u003eSize: 19.6 × 12.0 × 7.0 mm\u003c\/p\u003e\n\u003cp\u003eWeight: 1.35 g\u003c\/p\u003e\n\u003cp\u003eOperating Voltage: 3.3 ~ 8.5 V\u003c\/p\u003e\n\u003cp\u003eProtocol: Compatible with DSM\/DSM2\u003c\/p\u003e\n\u003cp\u003eBuilt-in LNA for improved distance and responsiveness\u003c\/p\u003e\n\u003cp\u003eBuilt-in Transponder with editable personal ID (range: 1 ~ 16,777,215)\u003c\/p\u003e\n\u003cp\u003eParallel high-speed output\u003c\/p\u003e\n\u003cp\u003eAdaptive output speed (e.g., 5.5ms with DX4S, 8.25ms with DX5C)\u003c\/p\u003e\n\u003cp\u003eBuilt-in Multi-Gyro (only in RXC52-DG\u0026amp;TP)\u003c\/p\u003e\n\u003cp\u003eSupports online firmware upgrade\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThe first micro surface rx with an antenna-less version that integrates a transponder with editable personal ID number.\u003cbr\u003eAfter using this receiver, users no longer need to install traditional bulky transponders on 1\/28~1\/24 RC cars.\u003cbr\u003eUsers can also modify the transponder's personal ID number easily and unlimited times.\u003cbr\u003eWhen the transponder is not in use, the user can turn off the transponder on the receiver through the GUI (TP_LED is off )\u003cbr\u003e \u003cbr\u003eNo need to add a transponder and make your car a mess or heavy, this micro receiver has the transponder built into it!\u003cbr\u003eWorks with EASYLAP.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47826046451951,"sku":"RXC52-DG\u0026TP","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/DSMG.jpg?v=1772328521"},{"product_id":"ko-asf-compatible-4-channel-micro-tower-antenna-receiver-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-kp-tp","title":"KO ASF Compatible 4 Channel MICRO Tower Antenna Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-KP\u0026TP","description":"\u003cp\u003eKO ASF Compatible 4 Channel MICRO Tower Antenna Receiver + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-KP\u0026amp;TP\u003c\/p\u003e\n\u003cp\u003eCompatible Transmitters:\u003c\/p\u003e\n\u003cp\u003eKT-18\u003c\/p\u003e\n\u003cp\u003eKO EX-1 ASF \/ EX-6 \/ EX-6R\u003c\/p\u003e\n\u003cp\u003e901SM \/ 902SM\u003c\/p\u003e\n\u003ch2 class=\"\" data-end=\"209\" data-start=\"159\"\u003e\u003cstrong data-end=\"209\" data-start=\"162\"\u003eMXO-RACING RXC52-KP\u0026amp;TP Receiver User Manual\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp class=\"\" data-end=\"302\" data-start=\"211\"\u003eThank you for choosing MXO-RACING products. Please read this document carefully before use.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"647\" data-start=\"304\"\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"323\" data-start=\"308\"\u003eRXC52-KP\u0026amp;TP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"407\" data-start=\"329\"\u003eminiature antennaless version surface receiver integrated with Transponder\u003c\/strong\u003e. It is a\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"476\" data-start=\"417\"\u003eKO ASF compatible miniature high-speed surface receiver\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"500\" data-start=\"481\"\u003e1:24\/1:28 scale\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"514\" data-start=\"504\"\u003eMINI-Z\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emodels. The receiver adapts an output speed that supports up to\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"588\" data-start=\"579\"\u003e2.8ms\u003c\/strong\u003e, much faster than other receivers using the same protocol.\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"1104\" data-start=\"649\"\u003eTo ensure its working distance and response speed, the receiver includes a\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"741\" data-start=\"724\"\u003ehigh-gain LNA\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Low Noise Amplifier) and has optimized\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"813\" data-start=\"782\"\u003eautomatic LNA control logic\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein the software. This ensures that the receiver functions effectively at both short and long distances. With its\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"943\" data-start=\"927\"\u003ecompact size\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"972\" data-start=\"948\"\u003ereliable performance\u003c\/strong\u003e, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"993\" data-start=\"978\"\u003eRXC52-KP\u0026amp;TP\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a great choice for hobbyists and enthusiasts who use\u003cspan\u003e \u003c\/span\u003e\u003cstrong data-end=\"1073\" data-start=\"1050\"\u003eKO ASF transmitters\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ein their mini RC car projects.\u003cbr\u003e\u003cspan\u003e\u003cstrong data-end=\"608\" data-start=\"580\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003chr class=\"\" data-end=\"1109\" data-start=\"1106\"\u003e\n\u003ch3 class=\"\" data-end=\"1129\" data-start=\"1111\"\u003e\u003cstrong data-end=\"1127\" data-start=\"1115\"\u003eFeatures\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cul data-end=\"1512\" data-start=\"1130\"\u003e\n\u003cli class=\"\" data-end=\"1164\" data-start=\"1130\"\u003e\n\u003cp class=\"\" data-end=\"1164\" data-start=\"1132\"\u003e\u003cstrong data-end=\"1140\" data-start=\"1132\"\u003eSize\u003c\/strong\u003e: 19.6 × 12.0 × 7.0 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1186\" data-start=\"1165\"\u003e\n\u003cp class=\"\" data-end=\"1186\" data-start=\"1167\"\u003e\u003cstrong data-end=\"1177\" data-start=\"1167\"\u003eWeight\u003c\/strong\u003e: 1.35g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1223\" data-start=\"1187\"\u003e\n\u003cp class=\"\" data-end=\"1223\" data-start=\"1189\"\u003e\u003cstrong data-end=\"1208\" data-start=\"1189\"\u003eWorking voltage\u003c\/strong\u003e: 3.3V – 8.5V\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1259\" data-start=\"1224\"\u003e\n\u003cp class=\"\" data-end=\"1259\" data-start=\"1226\"\u003e\u003cstrong data-end=\"1238\" data-start=\"1226\"\u003eProtocol\u003c\/strong\u003e: KO ASF compatible\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1280\" data-start=\"1260\"\u003e\n\u003cp class=\"\" data-end=\"1280\" data-start=\"1262\"\u003e\u003cstrong data-end=\"1278\" data-start=\"1262\"\u003eBuilt-in LNA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1333\" data-start=\"1281\"\u003e\n\u003cp class=\"\" data-end=\"1333\" data-start=\"1283\"\u003e\u003cstrong data-end=\"1298\" data-start=\"1283\"\u003eTransponder\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith editable personal ID number\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1375\" data-start=\"1334\"\u003e\n\u003cp class=\"\" data-end=\"1375\" data-start=\"1336\"\u003e\u003cstrong data-end=\"1357\" data-start=\"1336\"\u003ePersonal ID range\u003c\/strong\u003e: 1 – 16,777,215\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1410\" data-start=\"1376\"\u003e\n\u003cp class=\"\" data-end=\"1410\" data-start=\"1378\"\u003e\u003cstrong data-end=\"1408\" data-start=\"1378\"\u003eParallel high-speed output\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1472\" data-start=\"1411\"\u003e\n\u003cp class=\"\" data-end=\"1472\" data-start=\"1413\"\u003e\u003cstrong data-end=\"1438\" data-start=\"1413\"\u003eAdaptive output speed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(4.1ms at KT-18, 2.8ms at EX-6)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1512\" data-start=\"1473\"\u003e\n\u003cp class=\"\" data-end=\"1512\" data-start=\"1475\"\u003e\u003cstrong data-end=\"1510\" data-start=\"1475\"\u003eSupport online firmware upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong style=\"font-family: -apple-system, BlinkMacSystemFont, 'San Francisco', 'Segoe UI', Roboto, 'Helvetica Neue', sans-serif; font-size: 0.875rem;\"\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47826072338671,"sku":"RXC52-KP\u0026TP","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/ko-g.jpg?v=1772328803"},{"product_id":"ko-asf-compatible-4-channel-micro-tower-antenna-receiver-w-gyro-transponder-for-1-24-1-28-case-less-mxo-racing-rxc52-kg-tp","title":"KO ASF Compatible 4 Channel MICRO Tower Antenna Receiver w GYRO + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-KG\u0026TP","description":"\u003cp\u003eKO ASF Compatible 4 Channel MICRO Tower Antenna Receiver w GYRO + TRANSPONDER For 1-24 1-28 (CASE-LESS) [MXO RACING] RXC52-KG\u0026amp;TP\u003c\/p\u003e\n\u003cp\u003eCompatible Transmitters:\u003c\/p\u003e\n\u003cp\u003eKT-18\u003c\/p\u003e\n\u003cp\u003eKO EX-1 ASF \/ EX-6 \/ EX-6R\u003c\/p\u003e\n\u003cp\u003e901SM \/ 902SM\u003c\/p\u003e\n\u003cp class=\"\" data-end=\"955\" data-start=\"216\"\u003eThe RXC52-KG\u0026amp;TP is a miniature antennaless version surface receiver that integrates both Transponder and Mul_Gyro. It is a KO ASF compatible high-speed surface receiver designed for 1:24\/1:28 or MINI-Z models. This receiver adapts the output speed, supporting up to 2.8ms output, much higher than other receivers of the same protocol. To ensure optimal working distance and response speed, we have added a high-gain LNA to the hardware and optimized the automatic control logic of the LNA in the software, enabling effective performance at both close and long distances. With its compact size and reliable performance, the RXC52-KG\u0026amp;TP is the perfect choice for hobbyists and enthusiasts using a KO ASF transmitter for mini-RC car projects.\u003cspan\u003e\u003cstrong data-end=\"608\" data-start=\"580\"\u003e\u003c\/strong\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3 class=\"\" data-end=\"970\" data-start=\"957\"\u003e\n\u003cbr\u003eFeatures:\u003c\/h3\u003e\n\u003cul data-end=\"1373\" data-start=\"971\"\u003e\n\u003cli class=\"\" data-end=\"1003\" data-start=\"971\"\u003e\n\u003cp class=\"\" data-end=\"1003\" data-start=\"973\"\u003e\u003cstrong data-end=\"981\" data-start=\"973\"\u003eSize\u003c\/strong\u003e: 19.6 x 12.0 x 7.0 mm\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1023\" data-start=\"1004\"\u003e\n\u003cp class=\"\" data-end=\"1023\" data-start=\"1006\"\u003e\u003cstrong data-end=\"1016\" data-start=\"1006\"\u003eWeight\u003c\/strong\u003e: 1.35g\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1058\" data-start=\"1024\"\u003e\n\u003cp class=\"\" data-end=\"1058\" data-start=\"1026\"\u003e\u003cstrong data-end=\"1045\" data-start=\"1026\"\u003eWorking voltage\u003c\/strong\u003e: 3.3V – 8.5V\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1096\" data-start=\"1059\"\u003e\n\u003cp class=\"\" data-end=\"1096\" data-start=\"1061\"\u003e\u003cstrong data-end=\"1096\" data-start=\"1061\"\u003eCompatible with KO ASF protocol\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1115\" data-start=\"1097\"\u003e\n\u003cp class=\"\" data-end=\"1115\" data-start=\"1099\"\u003e\u003cstrong data-end=\"1115\" data-start=\"1099\"\u003eBuilt-in LNA\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1166\" data-start=\"1116\"\u003e\n\u003cp class=\"\" data-end=\"1166\" data-start=\"1118\"\u003e\u003cstrong data-end=\"1166\" data-start=\"1118\"\u003eTransponder with editable personal ID number\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1204\" data-start=\"1167\"\u003e\n\u003cp class=\"\" data-end=\"1204\" data-start=\"1169\"\u003e\u003cstrong data-end=\"1190\" data-start=\"1169\"\u003ePersonal ID range\u003c\/strong\u003e: 1 ~ 16777215\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1237\" data-start=\"1205\"\u003e\n\u003cp class=\"\" data-end=\"1237\" data-start=\"1207\"\u003e\u003cstrong data-end=\"1237\" data-start=\"1207\"\u003eParallel high-speed output\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1301\" data-start=\"1238\"\u003e\n\u003cp class=\"\" data-end=\"1301\" data-start=\"1240\"\u003e\u003cstrong data-end=\"1265\" data-start=\"1240\"\u003eAdaptive output speed\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(4.1ms with KT-18, 2.8ms with EX-6)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1334\" data-start=\"1302\"\u003e\n\u003cp class=\"\" data-end=\"1334\" data-start=\"1304\"\u003e\u003cstrong data-end=\"1325\" data-start=\"1304\"\u003eBuilt-in Mul_Gyro\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(Note 1)\u003c\/p\u003e\n\u003c\/li\u003e\n\u003cli class=\"\" data-end=\"1373\" data-start=\"1335\"\u003e\n\u003cp class=\"\" data-end=\"1373\" data-start=\"1337\"\u003e\u003cstrong data-end=\"1373\" data-start=\"1337\"\u003eSupports online firmware upgrade\u003c\/strong\u003e\u003c\/p\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003e*PLEASE CHECK WHAT PROTOCOLS YOUR TRANSMITTER CAN HANDLE!\u003c\/strong\u003e\u003c\/p\u003e","brand":"MXO Racing","offers":[{"title":"Default Title","offer_id":47826083545327,"sku":"RXC52-KG\u0026TP","price":64.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/ko-p.jpg?v=1772328845"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/collections\/mxo.jpg?v=1779177226","url":"https:\/\/supergdrift.com\/collections\/mxo-racing.oembed","provider":"Super-G R\/C Drift Arena","version":"1.0","type":"link"}