{"title":"Barell","description":"","products":[{"product_id":"edgeflex-spring-ver-1-0-barrell-brl-sg01","title":"EdgeFlex Springs ver. 1.0 \/ ver. 2.0 [BARELL] BRL-SG01 BRL-SG02","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/Barell-edgeflex17-springs-01.jpg?v=1764483971\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEdgeFlex Springs ver. 1.0 \/ ver. 2.0 [BARELL] BRL-SG01 BRL-SG02\u003c\/p\u003e\n\u003cp\u003eBarell's EdgeFlex springs comes in pairs. \u003cbr\u003eThey offer 2 types:\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBRL-SG01 Ver 1.0:\u003cbr\u003eLength: 27mm\u003cbr\u003eWire Diameter: 1.5mm\u003cbr\u003e8 Coils\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBRL-SG02 Ver 2.0:\u003cbr\u003eLength: 27mm\u003cbr\u003eWire Diameter: 1.5mm\u003cbr\u003e6 Coils\u003c\/p\u003e\n\u003cp\u003e=======\u003c\/p\u003e\n\u003cp\u003eEdgeFlex Spring is characterized by its excellent balance of \"kick-off\" and \"load-bearing\" during drifting. Version 1.0 is designed to maintain load without being repelled, even when using soft oil. This spring can be used on both the front and rear, and using it as a front and rear set allows you to fully experience its benefits. As a competition-oriented spring, it aims to prevent large body rolls and retain the load applied, providing a solid and controlled feel.\u003c\/p\u003e\n\u003cp\u003eSince this spring has significantly different characteristics compared to general ones, it is recommended to use it as a front and rear set. Also, for the best results, it is advisable to use it without applying preload initially. For lightweight chassis like the RDX, the 8-coil (Ver.1.0) springs are recommended for both the front and rear!\u003c\/p\u003e\n\u003cp\u003eLength: 27mm\u003cbr\u003eWire Diameter: 1.5mm\u003cbr\u003e8 Coils\u003c\/p\u003e\n\u003cp\u003e===========================\u003cbr\u003e\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThe Edge Flex Spring is known for its excellent balance between \"kick-out\" and \"load-bearing\" characteristics during drifting.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eVersion 2.0 maintains the previous spring characteristics but increases the spring rate to compensate for areas that Version 1.0 couldn't fully cover due to lever ratio and vehicle weight issues.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWe recommend trying Version 1.0 both front and rear first, and considering Version 2.0 if you find it insufficient.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThese springs can be used on both the front and rear, and because they have the same overall length as Version 1.0, they can be used in various combinations as a set for both ends.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDesigned for competitive use, these springs aim to provide a feeling of not losing the load placed on them rather than allowing significant rolling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eSpecifications\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eSince this spring has significantly different characteristics compared to general ones, it is recommended to use it as a front and rear set. Additionally, using it without applying preload initially will yield better results.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eIf the 8-coil (Ver.1.0) springs are overwhelmed by the vehicle's weight or if you desire a more direct feel, try using the 6-coil (Ver.2.0) springs.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eLength: 27mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWire Diameter: 1.5mm\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e6 Coils\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Ver 1.0 (8 Coils)","offer_id":46135026483439,"sku":"BRL-SG01","price":13.99,"currency_code":"USD","in_stock":true},{"title":"Ver 2.0 (6 Coils)","offer_id":46135026516207,"sku":"BRL-SG02","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/IMG_1529.jpg?v=1734727433"},{"product_id":"carbon-suspension-pin-3-0mm-diameter-2-pieces-42mm-44mm-49-5mm-52-8mm-barell-brl-sg01-brl-sg02-copy","title":"Carbon Suspension Pin 3.0mm Diameter (2 pieces) - 42mm 44mm 49.5mm 52.8mm [BARELL] BRL-SH03 BRL-SH04 BRL-SH05 BRL-SH06","description":"\u003cp\u003eCarbon Suspension Pin 3.0mm Diameter (2 pieces) - 42mm 44mm 49.5mm 52.8mm  [BARELL] BRL-SH03 BRL-SH04 BRL-SH05 BRL-SH06\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eThis is carbon suspension pins. \u003cbr\u003eIt is extremely lightweight, enhancing the overall feel.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eDiameter: φ3mm Length\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFitment guide (it can fit other platforms as well)\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e42mm - YD2 Series\u003cbr\u003e44mm - YD-2 Series (Rear), GALM (Front\/Rear), and RDX (Rear)\u003cbr\u003e49mm - Rear of GRK4 and GRK5 chassis\u003cbr\u003e52.8mm - Front of GRK4 and GRK5 chassis\u003c\/span\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"42mm","offer_id":46135049388271,"sku":"BRL-SH03","price":5.99,"currency_code":"USD","in_stock":true},{"title":"44mm","offer_id":46135049421039,"sku":"BRL-SH04","price":5.99,"currency_code":"USD","in_stock":false},{"title":"49mm","offer_id":46135050043631,"sku":"BRL-SH05","price":5.99,"currency_code":"USD","in_stock":true},{"title":"52.8mm","offer_id":46135050076399,"sku":"BRL-SH06","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/BRL-SH03.jpg?v=1734727972"},{"product_id":"carbon-front-bumper-yd2-rdx-grk-galm-barell-brl-sh07","title":"Carbon front bumper - YD2 RDX GRK GALM [BARELL] BRL-SH07","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA lightweight carbon front bumper.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eCompatible with various chassis such as GRK series, YD-2 series, GALM, and RDX.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003ePlease prepare screws and nuts separately according to the installation method.\u003c\/span\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135057252591,"sku":"BRL-SH07","price":14.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/fafb8c0d3edcaca28ae07ac5dd7a1603.jpg?v=1734728325"},{"product_id":"carbon-fiber-lightweight-suspension-mount-spacer-1-0mm-barell-brl-sh08","title":"Carbon Fiber Lightweight Suspension Mount Spacer 1.0mm [BARELL] BRL-SH08","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eCarbon Suspension Mount Spacer (1mm thickness)\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eThe width has been narrowed to 35mm to prevent interference when various suspension mounts are mounted in reverse. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBeing made of carbon, it is lightweight and ideal for adjusting the front skid angle.\u003c\/span\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135059972335,"sku":"BRL-SH08","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/2c053039c6e6ac564f9a1870ad0289f2.jpg?v=1734728480"},{"product_id":"carbon-fiber-rdx-rear-shock-tower-extension-barell-brl-sh09","title":"Carbon Fiber RDX Rear shock tower extension [BARELL] BRL-SH09","description":"\u003cp\u003eThis is an extension that can be attached to the rear shock tower of the RDX, allowing for fine adjustments of the damper mounting position or for mounting weights.\u003cbr\u003eIt is useful when the rear ride height cannot be lowered enough or when you want to adjust the damper mounting position forwards or backwards. Please\u003cbr\u003eprepare screws and nuts for mounting separately .\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135060168943,"sku":"BRL-SH09","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/3a14ad6bd20b3e48a61ada1684541eb3.jpg?v=1734728603"},{"product_id":"bcv01-dedicated-gearbox-back-top-deck-barell-brl-sh10","title":"BCV01 Dedicated Gearbox Back Top Deck [BARELL] BRL-SH10","description":"\u003c!-- wp:paragraph --\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eBCV01 Exclusive Parts By\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eusing it together with the DA-003M resin top deck mount (S) included in the kit, the gearbox can be moved to the rear .\u003c\/span\u003e\u003c\/p\u003e\n\u003c!-- \/wp:paragraph --\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135062986991,"sku":"BRL-SH10","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/122150658858f8952e8f35992d123554.jpg?v=1734728762"},{"product_id":"rdx-conversion-kit-bcv01-barell-brl-cv01","title":"RDX Conversion Kit BCV01 [BARELL] BRL-CV01","description":"\u003cp\u003eThis is a conversion kit that takes advantage of the RDX's excellent characteristics while fine-tuning it to perform better in modern competitions. It\u003cbr\u003ecan also be fitted with the Rave D side deck and YD-2 series front bulkhead.\u003c\/p\u003e\n\u003cp\u003eContents\u003cbr\u003e: Main chassis x1\u003cbr\u003e, Top deck x1\u003cbr\u003e, Top deck posts x2\u003cbr\u003e, Upper deck x1\u003cbr\u003e, Upper deck spacer 2.5mm x1\u003cbr\u003e, Upper deck spacer 2mm x1\u003cbr\u003e, M3x12 pan head screws x2\u003cbr\u003e, M3x8 pan head screws x2\u003cbr\u003e, M3x6 pan head screws x2\u003cbr\u003e, M3x8 countersunk screws x2\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135064985839,"sku":"BRL-CV01","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/08e9e53744a7c057d8c2a420334e73e1.png?v=1734728947"},{"product_id":"rd-conversion-kit-bcv01-barell-brl-cv03","title":"RD2.0 Conversion Kit BCV01 [BARELL] BRL-CV03","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eFeature 1:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe carbon main deck and upper deck greatly increase the chassis rigidity. The\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003efront is firm while the rear remains flexible, aiming to improve performance while maintaining ease of handling.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eFeature 2:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe steering crank mounting position can now be moved back and forth, allowing for greater freedom in changing Ackermann.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eIn addition, a new mounting hole has been added for the battery holder, allowing it to be installed at the rear in addition to the conventional position.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeature 3:\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front has been narrowed to accommodate the reverse installation of various suspension mounts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front area of a RAVE D RDX can be transplanted.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeature 1\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe carbon main deck and upper deck significantly increase chassis rigidity.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front maintains its stability, while the rear retain flexibility, aiming to enhance performance without sacrificing handling ease.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeature 2\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe mounting position of the steering crank can be adjusted forwards or backwards, allowing for greater freedom in Ackermann adjustments.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eAdditionally, a new hole has been added to the battery holder, enabling the battery to be mounted further back compared to the previous design.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003eFeature 3\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front has been narrowed to support reverse mounting of various suspension mounts.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eThe front section from the RAVE D RDX can also be transplanted.\u003c\/span\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46135066362095,"sku":"BRL-CV03","price":139.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/87a8ce037656042908908f32010a46d2.jpg?v=1734729019"},{"product_id":"edgeflex17-springs-ver-1-0-ver-2-0-barell-brl-sg03-brl-sg04","title":"EdgeFlex17 Springs ver. 1.0 \/ ver. 2.0 (17mm) [BARELL] BRL-SG03 BRL-SG04","description":"\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/Barell-edgeflex17-springs-01.jpg?v=1764483971\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eEdgeFlex17 Springs ver. 1.0 \/ ver. 2.0 [BARELL] BRL-SG03 BRL-SG04\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan\u003eA new lineup has been added to the EdgeFlexSpring series!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003eWhile maintaining the traditional spring characteristics, the overall length has been shortened to 17mm, allowing you to experience a different response and rolling behavior than ever before!\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e[2 pieces]\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eBarell's EdgeFlex17 springs comes in pairs. \u003cbr\u003eThey offer 2 types:\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBRL-SG03 Ver 1.0:\u003cbr\u003eSOFT\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eBRL-SG04 Ver 2.0:\u003cbr\u003eHARD\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"EdgeFlex17 Ver 1.0 (SOFT)","offer_id":46307348513007,"sku":"BRL-SG03","price":13.99,"currency_code":"USD","in_stock":true},{"title":"EdgeFlex17 Ver 2.0 (HARD)","offer_id":46307348545775,"sku":"BRL-SG04","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/IMG-4011.jpg?v=1741466289"},{"product_id":"stacking-spring-spacer-2mm-3mm-2pcs-barell-brl-sh11-brl-sh12","title":"Stacking Spring Spacer (2mm \/ 3mm) 2pcs [BARELL] BRL-SH11 BRL-SH12","description":"\u003cp\u003eStacking Spring Spacer (2mm \/ 3mm) 2pcs [BARELL] BRL-SH11 BRL-SH12\u003c\/p\u003e\n\u003cp\u003eThese are spring spacers that can be used when using short springs.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThere are two types: 2mm and 3mm spacers, and by stacking them, you can adjust the height in 1mm increments.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e(Example: stacking two 2mm spacers gives a total of 4mm lift)\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePerfectly compatible with the newly released \"EdgeFlex17\" spring!\u003cbr\u003eBy finely adjusting the total spring length with the spacers , you can fit a wide range of dampers — including short dampers—without altering the spring's feel!\u003c\/p\u003e\n\u003cp\u003eAvailable in 2mm or 3mm thicknesses.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSOLD IN PAIRS, YOU WILL NEED TO BUY 2 PACKS TO MAKE A FULL SET\u003c\/strong\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"2mm (BRL-SH11)","offer_id":46462345576687,"sku":"BRL-SH11","price":9.99,"currency_code":"USD","in_stock":true},{"title":"3mm (BRL-SH12)","offer_id":46462345609455,"sku":"BRL-SH12","price":9.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/IMG_6324_33e06649-8d99-4151-bfec-b411cc8293f8.jpg?v=1747429588"},{"product_id":"carbon-fiber-rdx-rear-support-barell-brl-sh13","title":"Carbon Fiber RDX Rear Support [BARELL] BRL-SH13","description":"\u003cp\u003eThis is an extension that can be attached to the rear shock tower of the RDX, allowing for fine adjustments of the damper mounting position or for mounting weights.\u003cbr\u003eIt is useful when the rear ride height cannot be lowered enough or when you want to adjust the damper mounting position forwards or backwards. Please\u003cbr\u003eprepare screws and nuts for mounting separately .\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":46462373134575,"sku":"BRL-SH13","price":7.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/df380afdffdf9dd9284815616dd03235.jpg?v=1747429828"},{"product_id":"lite-flex-deck-for-rdx-barell-brl-sh15","title":"Lite Flex Deck for RDX - Lower Deck Chassis [BARELL] BRL-SH15","description":"\u003cp\u003eLite Flex Deck for RDX [BARELL] BRL-SH15\u003c\/p\u003e\n\u003cp\u003eThe \"Lite Flex Deck\" was developed to further evolve the RDX.\u003c\/p\u003e\n\u003cp\u003eUsing a 2mm thick carbon material, it achieves weight reduction compared to the standard deck, while providing moderate flex to enhance the overall chassis response and traction performance.\u003c\/p\u003e\n\u003cp\u003eThe combination of sharp handling from the lighter weight and improved surface tracking from the flex ensures stability even at higher speeds and enables precise control.\u003c\/p\u003e\n\u003cp\u003eThis deck can be used not only as an upgrade by replacing the standard RDX deck but also as an optional part for the BARELL conversion kit \"CV01.\" It's a key component that expands the range of setup options for RDX users.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":47277011402991,"sku":"BRL-SH15","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/119381226d777d1c452ae897b6fd1cde.jpg?v=1765221263"},{"product_id":"edgeflex-springs-ver-0-super-soft-27mm-x-1-5mm-barell-brl-sg05","title":"EdgeFlex Springs ver. 0 Super Soft (27mm x 1.5mm) 10 Coil [BARELL] BRL-SG05","description":"\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cspan dir=\"auto\"\u003eThe third edition of EdgeFlexSpring is super soft.\u003cbr\u003e\u003c\/span\u003e\u003cbr\u003e\u003cspan dir=\"auto\"\u003eWhile retaining the traditional spring characteristics, we spent considerable time finalizing the specifications with a focus on performance for slippery surfaces, low center-of-gravity machines, and lightweight machines.\u003cspan\u003e \u003c\/span\u003eIt's easy to handle and should deliver smooth, satisfying cornering on any type of turn. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan dir=\"auto\"\u003eLength\u003cspan\u003e \u003c\/span\u003e:\u003cspan\u003e \u003c\/span\u003e27mm\u003c\/span\u003e\u003cbr\u003e\u003cspan dir=\"auto\"\u003eWire\u003cspan\u003e \u003c\/span\u003eDiameter\u003cspan\u003e \u003c\/span\u003e:\u003cspan\u003e \u003c\/span\u003e1.5mm\u003cspan\u003e \u003c\/span\u003e10\u003cspan\u003e \u003c\/span\u003eCoils\u003c\/span\u003e\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":47389497688303,"sku":"BRL-SG05","price":13.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/98b59af6ab1f663c71a93db50d1ea7f6.jpg?v=1767912807"},{"product_id":"aluminum-top-deck-for-rdx-barell-brl-sh16","title":"Aluminum Top Deck for RDX [BARELL] BRL-SH16","description":"\u003c!-- wp:paragraph --\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003eAn aluminum top deck designed to enhance rear rigidity for more aggressive driving.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eFeaturing black anodizing and silver edge machining, it delivers high precision and a premium finish.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eBy increasing rear rigidity, it improves traction during acceleration and enhances throttle control response. It can be used with the standard gearbox position, allowing bolt-on installation to the stock RDX chassis.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWhen combined with the conversion kit “BCV01” and the “LiteFlex Deck for RDX,” the gearbox can be moved 5.5 mm rearward, enabling fine adjustment of rear traction characteristics.\u003cbr\u003e\u003c\/p\u003e\n\u003c!-- \/wp:paragraph --\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":47944230142191,"sku":"BRL-SH16","price":37.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/SH16.jpg?v=1773076724"},{"product_id":"carbon-fiber-wheel-hub-spacer-1mm-barell-brl-sh02","title":"Carbon Fiber Wheel Hub Spacer (1mm) [BARELL] BRL-SH02","description":"\u003cp\u003eLightweight carbon wheel hub spacers (set of 4).\u003cbr\u003eEach spacer is 1 mm thick with a 4 mm center hole diameter, making them compatible with various vehicle models.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWeighing only 0.13 g per piece and made from low-distortion carbon, they are ideal for adjusting tread width.\u003c\/p\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":47944270217455,"sku":"BRL-SH02","price":5.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/SH02.jpg?v=1773076894"},{"product_id":"gearbox-side-brace-for-rdx-barell-brl-sh18","title":"Gearbox Side Brace for RDX [BARELL] BRL-SH18","description":"\u003c!-- wp:paragraph --\u003e\n\u003cp\u003eGearbox Side Brace for RDX\u003cbr\u003eAn aluminum brace that connects the RDX gearbox and battery holder.\u003cbr\u003e\u003cbr\u003eIt ensures that loads generated when the motor shifts left and right are transmitted firmly to the main deckwithout twisting the chassis.\u003cbr\u003e\u003cbr\u003e*The black part shown in the photo is the product.\u003cbr\u003e\u003cmeta charset=\"utf-8\"\u003e\u003c\/p\u003e\n\u003c!-- \/wp:paragraph --\u003e","brand":"BARELL","offers":[{"title":"Default Title","offer_id":47944300986607,"sku":"BRL-SH18","price":23.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/files\/SH18-1.jpg?v=1773077013"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0683\/9825\/2271\/collections\/barell.jpg?v=1773878666","url":"https:\/\/supergdrift.com\/collections\/barell.oembed","provider":"Super-G R\/C Drift Arena","version":"1.0","type":"link"}