Description

Each stripe is 120mm length. Operates on 6.0~7.4v.
Comes with authentic 3M Double Sided Tape. Just peel stick and enjoy

It is an under neon that sticks to the front and back inside the body and to the lower part of both sides and lights the feet of the machine by taking power from the receiver. Four LEDs of each chip type are arranged in front, back, left and right, each and it is flexible base so it can be pasted on any body.

The double-sided tape has been pasted on the base, 4 clear tapes for protection, aluminum tape for wiring installation, extension cord (100 mm) are also included. Since there is a direction to irradiate the LED, please energize it once before attaching, check the direction and then install.

The strips has sideways firing LED’s so the light is correctly projected onto the ground for the true underglow look.

Available in White, Green, Red, Blue and Amber(Orange)

 


ボディ内側の前後と両サイド下部に貼り付け、受信機から電源をとることでマシンの足元を照らすアンダーネオンです。前後左右にチップタイプのLEDがそれぞれ4灯づつ配され、フレキシブル基盤なのでどんなボディにも貼り付け可能です。カラーはブルーとレッドの2色。
基盤には両面テープ張り付け済みで、保護用のクリアテープ4枚、配線取り付け用のアルミテープ、延長コード(100mm)も付属します。LEDは照射する向きがあるので、貼り付ける前に一度通電させ、向きを確認してから取り付けを行ってください。